Hardwood Flooring Disclaimer

All of our products are produced from real, naturally solid, wood.

The hardwood flooring images accessible, both on-line and in printed, are intended as a guide only.  The stain colors displayed on our product imagery are accurate but due to the limitations of printers, scanners, computer monitors and other equipment, the colors seen on these images may not be accurately reproduced on the product specified.

 Wood is a natural product; therefore, each piece has a unique color and appearance with every floor installed having its own distinctive visual character.  We strongly recommend all customers visit our showroom or order a color and species sample of their choice. 

 Samples and photographic reproductions can give an example of a particular wood floor’s appearance but they may not be representative of the full range of color, texture and grain variations which can occur within the product itself.  A color sample may vary depending on stain batches produced; although we do strive to ensure the colors are as accurate as possible but exact color match can not be guaranteed.

It is impossible to fill all knots completely flat or flush with the board; therefore, a dipping effect may be present.  This would not be considered a factory defect as the Industry Standard for Product Quality allows variation of up to 5% max.  The installer and owner should work together to inspect product prior to installation. Any imperfect pieces should be used in hidden areas, cut off or not installed.

 We strongly recommend that the floor be properly maintained in order for your flooring to retain its natural beauty and finish.

 Maintenance Instructions

 All floors should be refreshed after installation. 

DAILY   - Vacuum or sweep floor to remove any dust, sand & dirt distributed throughout the day.

WEEKLY/BI-WEEKLY

   - damp mop with Euku maintenance-emulsion

   - add 10% mixture per 1 litre of luke warm water.  DO NOT SOAK

   - allow floor to completely dry before walking on it.

     (please refer to further detailed instructions on cleaner bottle)

1 – 5 YEARS (depending on traffic)

- Apply Euku – Refresher using a spray bottle.  Lightly mist the floor evenly then mop with a disposable cloth mop. 1 litre will cover 500 sq/ft (flooring can be refreshed by area or entire floor space)

   - If using a service professional with a buffing machine, insure they are using a beige or white pad only

   - DO NOT apply too many times, in order to prevent wax build-up. 

   - DO NOT walk on the floor with shoes – allow 30 hours of drying time.

   - Final strength of the finish will be achieved in approximately two weeks. 

     (please refer to further detailed instructions on refresher bottle)

 WARNING: Spontaneous Combustion Danger!

Oil-soaked materials (rags, steel wool, sanding dust, etc.) may spontaneously combust.

Immerse oil-soaked materials in water and store in an airtight metal container.
Dispose accordingly.

---

Showroom Hours
Monday to Friday : 10 am - 2 pm
Saturdays: By appointment only
Holiday weekends closed

Wide Plank Hardwood Ltd.
8444-A Aitken Rd. Chilliwack B.C. Canada V2R 3W8
info@wideplankhardwood.com Toll Free 1-877-795-2236

Check out our "Antique Impressions Hardwood"  line of flooring!