Wide Plank Hardwood Contacts

 About Us     Hard Wax Oil    Products    References    Other info    Contacts    Home    Location    Dealers

 

 Maintenance Instructions

 All floors should be refreshed after installation. 

DAILY   - Vacuum or sweep floor to remove any dust, sand & dirt distributed throughout   the day.

WEEKLY/BI-WEEKLY

   - damp mop with Euku maintenance-emulsion

   - add 10% mixture per 1 litre of luke warm water.  DO NOT SOAK

   - allow floor to completely dry before walking on it.

     (please refer to further detailed instructions on cleaner bottle)

     1 – 5 YEARS (depending on traffic)

- Apply Euku – Refresher using a spray bottle.  Lightly mist the floor evenly then mop with a disposable cloth mop. 1 litre will cover 500 sq/ft (flooring can be refreshed by area or entire floor space)

   - If using a service professional with a buffing machine, insure they are using a beige or white pad only

   - DO NOT apply too many times, in order to prevent wax build-up. 

   - DO NOT walk on the floor with shoes – allow 30 hours of drying time.

   - Final strength of the finish will be achieved in approximately two weeks. 

     (please refer to further detailed instructions on refresher bottle)

 WARNING: Spontaneous Combustion Danger!

Oil-soaked materials (rags, steel wool, sanding dust, etc.) may spontaneously combust.

Immerse oil-soaked materials in water and store in an airtight metal container.
Dispose accordingly.